Study on residual stress in viscoelastic thin film using curvature measurement method

Using LSM (laser scanning method), the radius of curvature due to thermal deformation in polyimide film coated on Si substrate is measured. Since the polyimide film shows viscoelastic behavior, i.e., the modulus and deformation of the film vary with time and temperature, we estimate the relaxation modulus and the residual stresses of the polyimide film by measuring the radius of curvature and subsequently by performing viscoelastic analysis. The residual stresses relax by an amount of 10% at 100°C and 20% at 150°C for two hours.     

Electron energy loss spectroscopy for analysis of inhaled ultrafine particles in rat lungs

Epidemiologic studies have associated cardiovascular morbidity and mortality with ambient particulate air pollution. Particles smaller than 100 nm in diameter (ultrafine particles) are present in the urban atmosphere in very high numbers yet at very low mass concentration. Organs beyond the lungs are considered as targets for inhaled ultrafine particles, whereby the route of particle translocation deeper into the lungs is unclear. Five rats were exposed to aerosols of ultrafine titanium dioxide particles of a count median diameter of 22 nm (geometric standard deviation, GSD 1.7) for 1 hour. The lungs were fixed by intravascular perfusion of fixatives immediately thereafter. TiO(2) particles in probes of the aerosol as well as in systematic tissue samples were analyzed with a LEO 912 transmission electron microscope equipped with an energy filter for elemental microanalysis. The characteristic energy loss spectra were obtained by fast spectrum acquisition. Aerosol particles as well as those in the lung tissue were unambiguously identified by electron energy loss spectroscopy. Particles were mainly found as small clusters with a rounded shape. Seven percent of the particles in the lung tissue had a needle-like shape. The size distribution of the cluster profiles in the tissue had a count median diameter of 29 nm (GSD 1.7), which indicates no severe clustering or reshaping of the originally inhaled particles. Electron energy loss spectroscopy and related analytical methods were found to be suitable to identify and localize ultrafine titanium dioxide particles within chemically fixed and resin-embedded lung tissue.     

A preliminary design and structural analysis of the lifting tools for 40° sector sub-assembly and handling ITER components

The purpose-built, ITER tokamak assembly tools, which are to be provided by Korea, should be designed to meet: the assembly plan, space reservations, safety standards, simple operations, efficient maintenance, and so on. It is very important that the ITER assembly tools are able to lift and transfer ITER components or their sub-assemblies to their assembled position safely. Furthermore, the lifting tools will lift and handle very heavy loads that can be more than 1200 tonnes sometimes. Therefore, the ITER lifting tools must be designed to endure these heavy load conditions with regard to their structural integrity. Also, these designs should be verified through an appropriate method. The preliminary design of the sector lifting tool and associated lifting attachments are introduced in this paper. The sector lifting tool was designed especially to lift and handle various ITER components by adjusting the lifting centre. The structural analysis results using ANSYS are described considering the heaviest load condition. The results of the analysis show that; all stresses applied on the lifting tool are lower than the allowable stress of the applied material.     

A preliminary conceptual design study for Korean fusion DEMO reactor

As the ITER is being constructed, there is a growing anticipation for an earlier realization of fusion energy, so called fast-track approach. Korean strategy for fusion energy can be regarded as a fast-track approach and one special concept discussed in this paper is a two-stage development plan. At first, a steady-state Korean DEMO Reactor (K-DEMO) is designed not only to demonstrate a net electricity generation and a self-sustained tritium cycle, but also to be used as a component test facility. Then, at its second stage, a major upgrade is carried out by replacing in-vessel components in order to show a net electric generation on the order of 300 MWe and the competitiveness in cost of electricity (COE). The major radius is designed to be just below 6.5 m, considering practical engineering feasibilities. By using high performance Nb₃Sn-based superconducting cable currently available, high magnetic field at the plasma center above 8 T can be achieved. A design concept for TF magnets and radial builds for the K-DEMO considering a vertical maintenance scheme, are presented together with preliminary design parameters.     

Synthesis and In Vitro Properties of Dexamethasone 21-Sulfate Sodium as a Colon-Specific Prodrug of Dexamethasone

ABSTRACT

We synthesized dexamethasone 21-sulfate sodium (DS) as a colon-specific prodrug of dexamethasone and investigated its properties. Introduction of a sulfate group to dexamethasone lowered the apparent partition coefficient from 52.5 to 0.27 in 1-octanol/pH 6.8 phosphate buffer at 37°C. DS was stable on incubation with buffer solutions of varied pH or with the upper intestinal contents of rats at 37°C for 24 h. On incubation with the cecal contents, DS was hydrolyzed by producing dexamethasone over 80% of the dose at 10 h. When DS was incubated with the cecal contents collected from trinitrobenzenesulfonic acid (TNBS)-induced colitic rats, the degree of prodrug hydrolysis and production of dexamethasone amounted to 70% of healthy rats. In comparison with prednisolone, hydrocortisone, and cortisone, dexamethasone was stable against bioinactivation by the cecal contents, a desirable property for the development of a colon-specific prodrug. These results demonstrated that DS might be delivered specifically to the colon as an intact form to produce dexamethasone in high yield, suggesting DS as a potential colon-specific prodrug of dexamethasone.     

Neural network-based prediction of the long-term time-dependent mechanical behavior of laminated composite plates with arbitrary hygrothermal effects

Journal of Mechanical Science and Technology - Recurrent neural network (RNN)-based accelerated prediction was achieved for the long-term time-dependent behavior of viscoelastic composite laminated...     

Determination of atomistic deformation of tricalcium silicate paste with high-volume fly ash

We examined the effect of incorporating high-volume fly ash on the atomic arrangement and interatomic deformation behavior of calcium silicate hydrates in tricalcium silicate paste upon exposure to external forces. The interatomic structural changes and strains under compressive load were assessed using synchrotron in situ high-energy X-ray scattering-based atomic pair distribution function analysis. Three different types of strains, which were (a) macroscopic strains from gauges on the surfaces of specimen, (b) strains in a reciprocal space (Bragg peak shift), and (c) strains in real space (PDF peak shift), were compared to each other. All monitored and calculated strains for tricalcium silicate-fly ash (50 wt% fly ash) paste were compared with the counterparts of the pure tricalcium silicate paste. Pair distribution function analysis in the range of r < 10 Å indicated that the atomic arrangement of tricalcium silicate-fly ash was similar to that of synthetic calcium silicate hydrates followed by that of pure tricalcium silicate paste. Moreover, the pair distribution function refinement results revealed that the calcium silicate hydrate structure in tricalcium silicate-fly ash paste was similar to tobermorite 11 Å, unlike that in pure tricalcium silicate paste. The interatomic strain of tricalcium silicate-fly ash in the real space (r < 20 Å) was smaller than that of tricalcium silicate under compression, which suggested that the incompressibility of calcium silicate hydrates at atomistic scale was enhanced by the incorporation of fly ash into it. This was likely to be caused by the increased silicate polymerization of calcium silicate hydrates, which was attributed to the increase in the amount of silicate in their structure via the addition of fly ash.     

System analysis study for Korean fusion DEMO reactor

A conceptual design study for a steady-state Korean fusion DEMO reactor (K-DEMO) has been initiated. Two peculiar features need to be noted. First, the major radius is designed to be just below 6.5 m, considering practical engineering feasibilities. But still, high magnetic field at the plasma center around 8 T is expected to be achieved by using current state-of-the-art high performance Nb₃Sn strand technology. Second, a two-stage development plan is being considered. In the first stage, K-DEMO will demonstrate a net electricity generation but will also act as a component test facility. Then, after a major upgrade, K-DEMO is expected to show a net electric generation on the order of 300 MWe and the competitiveness in cost of electricity (COE). Feasibility of such a practical, near-future demonstration reactor is studied in this paper, based on a zero dimensional system analysis code study. It was shown that a net electric generation on the order of 300 MWe can be achieved below the optimistic β_N limit of 5. The elongation of K-DEMO is around 1.8 with single null configuration. Detailed optimization process and the resultant various plasma parameters are described.     

Antioxidant activities and nutritional properties of Jeonyak prepared with beef bone stock and gelatin

The antioxidant activities and nutritional properties of Jeonyak made with beef bone stock and gelatin were investigated. Traditional Jeonyak (J1) was prepared with beef bone stock, whereas modified Jeonyak was made with gelatin and honey (J2) or with gelatin and oligosaccharides (J3). All 3 kinds of Jeonyak had antioxidant activities and J1 had the highest activity. The α-glucosidase inhibitory activity was measured to investigate the antidiabetic effect and J3 had the highest inhibitory activity of 80.47%. Glycine was the most abundant amino acid in all 3 kinds of Jeonyak. Both traditional and modified Jeonyaks have antioxidative and antidiabetic effects, suggesting that Jeonyak can be used as an effective traditional functional food.